Glass Balustrade

Our glass balustrade kits combine 10mm toughened safety glass with SS316 marine-grade stainless steel posts in a satin finish. Choose a system with a top handrail or a cleaner look without one. Buy a complete kit for your project, or pick individual panels and fittings.

Not sure what you need? Send us your measurements for a free quote and CAD drawing.

Stainless Steel Glass Balustrade Systems

Every post and handrail in our range is made from SS316 stainless steel, the marine grade chosen for outdoor and coastal use because it resists corrosion far better than standard 304 steel. Posts and handrails use a substantial 42.4mm diameter tube with a 2.0mm wall, finished in satin for a modern look that hides fingerprints and water marks better than polished steel.

The glass is 10mm toughened safety glass with flat polished edges and safety corners, so panels are smooth to handle during installation and safe once fitted. Toughened glass is several times stronger than standard glass of the same thickness. If it does break, it shatters into small blunt pieces rather than sharp shards.

Choose Your System

Glass Balustrade with Handrail

Glass panels sit between satin stainless posts, finished with a continuous 42.4mm top handrail. The handrail gives a comfortable grab rail and ties the whole run together. It is the system we recommend for balconies, raised terraces, stairs and anywhere with a significant drop.

Glass Balustrade without Handrail

This uses the same posts and 10mm glass, with post caps instead of a top rail, for a cleaner, more open view. It suits patios, garden terraces, pool surrounds and low-level decking where you want to define an edge without adding visual weight.

Both systems are available as complete kits or as individual components, so you can extend an existing run or replace a single part.

Toughened Glass Panels

Our 10mm toughened glass panels come in two widths, 900mm and 1000mm, and in heights from 300mm to 1200mm. That covers everything from low planter-edge screens to full-height balcony balustrades. All panels have polished edges and safety corners as standard.

Balustrade Components and Fittings

We stock every fitting you need to complete a run, all in matching SS316 satin stainless steel. Shop all balustrade components.

  • End, middle and corner posts, for handrail or post-cap systems
  • 3000mm handrail lengths
  • 90-degree and adjustable elbows for corners and level changes
  • Fixed and adjustable wall connectors
  • In-line tube connectors and end caps
  • Adjustable handrail saddle brackets
  • Fascia-mount handrail posts

Where Our Glass Balustrades Work Best

  • Decking: Edge raised decks without blocking the view of the garden.
  • Balconies and roof terraces: The handrail system gives strong edge protection while keeping the outlook open.
  • Patios and garden terraces: Define level changes and seating areas with a light, modern edge.
  • Stairs and landings, indoor or outdoor: …

How Much Glass Balustrade Do I Need?

Measure the full length of each run and note any corners, walls and changes in level. Your run will need an end post at each open end, a corner post at each turn and middle posts between panels. Choose panel widths that fill the run as closely as possible. If your measurements don’t divide neatly, send them to us and we’ll work out the most efficient layout and provide a free CAD drawing.

Glass Balustrade Height and Building Regulations

In England, guarding requirements are set out in Approved Document K, and barrier design is covered by BS 6180. As a general guide for homes, guarding is usually required where there is a drop of more than 600mm. Recommended minimum heights are typically 900mm for internal stairs and landings and 1100mm for external balconies and roof edges.

Requirements depend on your project, so check with your local building control or a qualified installer before you order. Our team can tell you which system and panel height suit your space.

Frequently Asked Questions

What thickness is your balustrade glass?

All our panels are 10mm toughened safety glass with flat polished edges and safety corners.

What grade of stainless steel do you use?

Every post, handrail and fitting is SS316 marine-grade stainless steel with a satin finish. SS316 offers excellent corrosion resistance outdoors, including in coastal areas.

Should I choose a system with or without a handrail?

For balconies, raised terraces, stairs and larger drops, we recommend the handrail system. Without a handrail gives a more minimal look and suits patios, garden edges and lower-level areas.

Can I install the balustrade myself?

Yes. Our systems are designed for competent DIY installation, and our installation guide walks you through each step. For balconies and work at height, we recommend a professional installer.

Can I buy individual parts?

Yes. Every panel, post and fitting is sold separately as well as in complete kits.

Do you offer quotes and drawings?

Yes. Send us your measurements and we’ll provide a free quote and CAD drawing for your project.

Is the glass suitable for indoor use?

Yes. The glass and stainless components are suitable for both indoor and outdoor installations.

Get a Free Quote

Tell us your measurements and we’ll recommend the right system, list every part you need and send you a free CAD drawing. Request your free quote, call 01924 566706 or email info@luxuryscreens.co.uk.

Scroll to Top